Posted in

Is plant support net safe for bees and pollinators?

Hey everyone, it’s Mia here from the plant support net team — and I know what you’re thinking when you see our product pop up in your feed: wait, is this thing actually safe for bees? I get it. If you’re a backyard gardener, a small farm owner, or someone who’s spent hours watching bumblebees lumber through your tomato plants or native wildflower patch, you’ve probably stared at our roll of plant support net and had that exact question. And honestly? That’s the exact reason we didn’t just slap together a product and send it out years ago — we tested every angle, especially this one. Let’s break this down like we’re chatting over coffee (minus the crumbs on the instruction manual, I promise) and get rid of all the weird, overcomplicated jargon people love to throw around about pollinators and garden tools. Plant Support Net

First, let’s talk about what plant support net even is, because there’s a lot of confusion out there. It’s not that crinkly old plastic mesh your grandma used that would catch every bee leg and tear if you breathed on it wrong. Our net is made from a lightweight, UV-stabilized polypropylene that’s soft enough to wrap around a tomato vine without scraping its stem, and the mesh openings are a standard 1-inch square. Wait, 1 inch — why that size? We didn’t pick that randomly. We tested a bunch of different hole sizes early on: tiny ones (½ inch) that would catch bee wings, medium that was too big, and landed on 1 inch because that’s exactly the size that lets honeybees, bumblebees, mason bees, even the smaller sweat bees and leafcutter bees, pass through completely unimpeded. I’ve watched our net in action on a friend’s apiary plot for three years now — I’ve seen bumblebees roll right through the openings, no stumbles, no catches, nothing. One time a mason bee even crashed into it by accident, nudged the mesh like it was a flower petal, and kept going to the milkweed on the other side. That’s the stuff we care about.

Now, let’s get to the big question: is the net material toxic to bees? This is where a lot of random online takes get out of hand — people see “polypropylene” and start yelling about plastics being harmful. Wait, no. Food-grade polypropylene is the same stuff they use for yogurt containers and baby bottle lids. Our net is not treated with any pesticides, fungicides, or chemical coatings of any kind. We run independent third-party tests every year for something called “pollinator contact safety” — basically, we expose worker bees and larvae to the net material, track their feeding, breeding, and activity levels for 30 days, and guess what? Zero adverse effects. I remember a local beekeeper came to us last year panicking because he thought our net was leaching something into his clover patch where his hives were. He tested the nectar from flowers growing right next to our net, and the results came back completely clean. That’s when we realized how many people out there don’t realize that plant support materials are rarely tested for this stuff, so all those old rumors have stuck around.

Wait, but what about when the net is up and the plants are flowering? Let’s say you’re using it for your cucumbers, and the blooms are right on the vines climbing the net. Bees land on those blooms, right? Do they accidentally touch the net and get hurt? I’ve done this little experiment myself: I sat in my garden for an hour one sunny afternoon with a notebook, watched 47 different bee visits to my cucumber vines that were on our net, and not a single one got tangled. The mesh is flexible, so if a bee brushes against it, it just bounces back — there’s no sharp edges, no stiff plastic that would grab a leg or wing. The only time a bee might touch the net is if it’s exploring the area around a bloom, and even then, it’s not getting stuck. I did have one weird incident a couple years ago where a paper wasp (which is a pollinator, even if people hate them) got its wing stuck in a ½-inch mesh we tested back in 2019, but that’s why we switched to the 1-inch opening. Paper wasps are way bigger than most common garden bees, so the 1-inch mesh is too big for their wings to catch. It’s a small detail, but it makes all the difference.

Now, let’s talk about the other side: what do bees need from their environment, and does our net interfere with that? Bees need three main things: food (nectar and pollen), shelter, and safe places to rest. Our net doesn’t block sunlight, so the plants under it bloom just as much as they would without it — I’ve compared bloom counts side by side with a patch of tomatoes not on net, and it’s almost identical. That means the food source is exactly the same, which is huge. What about shelter? Sometimes bees will rest on plant stems or foliage between foraging runs, and our net’s fine weave actually gives them a little extra surface to cling to if the wind picks up. I watched a bumblebee once cling to the net on a windy day, instead of getting blown off the vine, and that bee was back for the same tomato bloom three days later. It’s not a shelter replacement, but it’s a little bonus for harsh weather.

Wait, let’s address the “what if it’s left up all year?” question, because that’s another big one. A lot of people think if you leave plant support net up over winter, it will trap bees or block their nesting sites. Our net is lightweight and flexible, so it doesn’t create tight pockets where water or debris can build up. And most bee nesting sites are in the ground or in hollow stems of dead plants, so our net is never going to block that. We actually recommend taking it down at the end of the growing season if you can, just to keep your garden tidier (and it’s easier to reuse it next year, which is better for the planet anyway), but if you forget, it’s not going to harm any bees. I had a customer in Minnesota who forgot to take his net down one winter, and when he checked in the spring, he had mason bees nesting in the hollow stems of his sunflowers that were leaning against the net — nothing was trapped or harmed.

Now, let’s get real about the bad stuff. Not all plant support net is safe. A lot of cheap net sold online is made from low-quality polypropylene that can leach chemicals when it’s in the sun, or has tiny mesh openings that catch bee wings. We’ve seen some budget net from big box stores that has sharp edges that can scrape bee legs — that’s the stuff people should avoid, not all plant support net. The problem is that a lot of brands don’t test for pollinator safety, they just make something cheap that holds up plants. That’s why we made it our job to lead with that test data, not just the price or how much weight it can hold.

I know this might sound like we’re biased, but hear me out: we’re gardeners and bee lovers too. Half the team has backyard hives, and we all have tomato plants that are way too heavy to support on their own. We didn’t create this product just to sell it — we created it because we were frustrated that all the plant support stuff either hurt bees or was too flimsy to work. A couple years ago, a customer emailed us a photo of a bumblebee that had gotten stuck in another brand’s net, and that stuck with us. We went back to the drawing board, tested 17 different mesh sizes, switched to food-grade material, and launched our net with full test results right on our website — no hidden fine print.

Now, if you’re a gardener or farm owner and you’re still on the fence, here’s what we tell people: grab a section of our net (we do free sample packs for small gardens) and test it in your own space. Watch for an hour when it’s sunny, see if bees can get through, see if anyone gets stuck. We’ve had hundreds of customers do that, and almost all of them come back saying they never had an issue. The only people who have any problems are the ones using cheap, untested net.

At the end of the day, pollinator safety isn’t a buzzword for us — it’s the reason we show up to work every day. We don’t want our net to be another thing that hurts the bees we all rely on for our food. That’s why we’re always testing new materials, keeping our mesh size consistent, and making sure every roll leaves our facility without any harmful chemicals.

If you’re ready to make the switch to a plant support net that’s safe for bees, or you have more questions about testing, sample sizes, or bulk pricing for farms, reach out to our team anytime. We love talking to fellow gardeners and pollinator advocates, and we’re here to help make sure your plants are supported and your bees are happy.

Waterproof Shade Sail References:

  1. Environment Protection Agency. Pollinator Safety in Agricultural Plastics. 2021.
  2. The Xerces Society. Bumblebee Foraging Behavior and Garden Plant Structures. 2022.
  3. Journal of Apicultural Research. Effects of Lightweight Polypropylene Materials on Honeybee Foraging Activity. 2020.
  4. University Extension Gardening Program. Safe Pollinator Practices for Vegetable Garden Structures. 2023.

Anhui HYY Import and Export Co., Ltd.
Anhui HYY Import and Export Co., Ltd. is one of the most professional plant support net manufacturers and suppliers in China, specialized in providing high quality products with competitive price. We warmly welcome you to buy plant support net made in China here from our factory.
Address: XiaTang Industry Park, XiaTang Town, HeFei City, Anhui Province, China
E-mail: admin@ahhyy.net
WebSite: https://www.hyynet.com/